SCE-72EL7212SSLPPL - Saginaw Control and Engineering

Saginaw Control and Engineering
95 Midland Road Saginaw, MI 48638-5770
(800) 234-6871 - Fax: (989) 799-4524
SCE@SaginawControl.com

Product Specifications:

Part Number: SCE-72EL7212SSLPPL

Description: S.S. 2DR EL LPPL Enclosure

Height: 72.00"

Width: 72.00"

Depth: 12.00"

Price Code: S4

List Price: $12,338.20

Catalog Page: 302

Est. Ship Weight: 720.00 lbs

Special Instruction for Installation of Galv Plate: See Installation Instruction Bottom of this Page

Download CAD Package Add to Bill of Material Print Page

Construction

0.104 In. stainless Steel Type 304
Seams continuously welded and ground smooth.
Flange trough collar around all sides of door opening.
Removable centerpost.
Heavy duty lifting eyes anchored into reinforced top.
Body stiffeners.
Stainless Steel concealed hinges.
Black keylocking/padlocking handles.
3-point latching mechanism.
Removable print pocket.
12 In. removable floor stands.
Panel supports.
Provision for mechanical interlock.
Pour in place oil & water resistant gasket
Ground stud on door and body.
Provisions for light kit.
Collar studs 3/8-16 provided for mounting optional panels.

Application

Designed to house electrical and electronic controls, instrumentation and components in indoor & outdoor locations. For outdoor application a drip shield and drain vent is recommended.

For details about the design, performance expectations, applications and design suggestions - See Design Considerations www.saginawcontrol.com/instman/considerations.pdf

Options

Provisions for mechanical interlock. See Accessory section to order.

Finish

#4 brushed finish on all exterior surfaces. Optional sub-panels are powder coated white.

Industry Standards - (IS6)

NEMA Type 3R, 4, 4X, 12 and Type 13
UL Listed Type 3R, 4, 4X and 12
CSA Type 4, 4X and 12
IEC 60529
IP 66

Notes

Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.