Saginaw Control and Engineering
95 Midland Road Saginaw, MI 48638-5770
(800) 234-6871 - Fax: (989) 799-4524
SCE@SaginawControl.com
SCE-1008ELJWSS6
Product Specifications:
Part Number: SCE-1008ELJWSS6
Description: S.S. ELJ Enclosure W/Viewing Window
Height: 10.00"
Width: 8.00"
Depth: 4.00"
Price Code: S6
List Price: $516.93
Catalog Page: 262
Est. Ship Weight: 7.00 lbs
Construction
- 0.063 In. stainless steel Type 316/316L.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- Pour in place oil & water resistant gasket
- 0.25 In. polycarbonate window.
- Standoffs provided for mounting optional panels.
- Removable hinges.
- Doors open 180 degrees.
- Black mini quarter turn latches.
- Latches are opened or closed with a screwdriver.
- Sealing washers and hole plugs included.
- Ground stud on door & body.
- Optional mounting feet available.
- Optional latches available.
Application
Designed to house electrical controls, instruments and components that require unrestricted viewing of the gauges or controls in areas which may be regularly hosed down or are in very wet or oily conditions. Provides protection from dust, dirt, oil, and water. For outdoor applications a drip shield is recommended. For outdoor application a drip shield and drain vent is recommended.
For details about the design, performance expectations, applications and design suggestions - See Design Considerations www.saginawcontrol.com/instman/considerations.pdf
Finish
#4 brushed finish on all exterior surfaces. Optional panels are powder coated white.
Industry Standards - (IS6)
- NEMA Type 3R, 4, 4X, 12 and Type 13
- UL Listed Type 3R, 4, 4X and 12
- CSA Type 4, 4X and 12
- IEC 60529
- IP 66
Notes
Recommend use as Type 3R rating in full outdoor exposure and extreme weather environments.
For more details see Design Considerations When Specifying Your Enclosure on our website.
Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.
Optional Accessories
Similar Part Numbers
Installation Information
- Dead Front CH, ELJ and NEMA 1 Style Installation Instructions. REV. 1
- Dead Front Wall Mount < 20 In Height Installation Instructions. EL-LP
- Enviroline Junction Enclosure
People who have purchased this part also bought: