Designed to house the main power supply in an external enclosure on the right side of the main enclosure, keeping the live side of the power supply separate from the primary electrical equipment. Provision for Compact Fusible Disconnect with Rotary Handle Disconnect 30 to 200 amp Allen-Bradley 194R, Square D GS2, Eaton/Bussmann R9, Siemens CFS models and Socomec Fuserbloc models. Provide protection from dirt, dust, oil, and water and can house most standard type disconnects.
- 0.125″ carbon steel.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of the door opening.
- Body stiffeners in large enclosures for extra rigidity
- Heavy duty lifting eyes anchor into the reinforced top.
- Removable center posts permit easy subpanel installation.
- Concealed hinges.
- Black zinc die cast padlocking handles.
- 3-point latching mechanism.
- Large removable print pockets.
- Pour in place oil and water resistant gasket.
- Removable panels mount on collar studs.
- Defeater on the master door requires a screwdriver to open.
- Mechanical interlock activated by the External Disconnect prevents the main door of the enclosure from being closed unless the EXD enclosure is first closed.
- Mechanical interlock activated by the master door prevents slave doors from being opened first. Doors can be closed in any order.
- Hole plugs provided to seal holes in the bottom of the enclosure.
- Ground stud on door and body.
- Provisions for the light kit.
- Provision Compact Fusible Disconnect with Rotary handle Disconnect 30 to 200 amp Allen-Bradley 194R, Square D GS2, Eaton/Bussmann R9, Siemens CFS models and Socomec Fuserbloc models