Saginaw Control and Engineering's Products are Made in the USA

Saginaw Control and Engineering - Your Enclosure Source

Definitions and Terminology



For Stock Product Contact:

Saginaw Control and Engineering
Reno Distribution Center
795 Denmark Drive
McCarran, NV 89434-4401
Phone: 775/343-1834
Fax: 775/343-1838
reno@saginawcontrol.com


Corporate Office/Manufacturing:

Saginaw Control and Engineering
95 Midland Road
Saginaw, MI 48638-5770
Phone: 989/799-6871
Fax: 989/799-4524
sce@saginawcontrol.com



Term
Definition
ANSI American National Standards Institute
BID Build Identification Number
BOM Bill of Materials
CSA Canadian Standards Association
CSE Customized Standard Enclosures
cUL Underwriters Laboratories, Inc (Tested to Canadian Requirements)
cULus Underwriters Laboratories, Inc (Tested to US & Canadian Standareds)
DF Dead Front
EMI Electro Magnetic Interference
FORD Ford Manufacturing Standards
FTC Flange Trough Collar
GALV Galvanized Material
IEC International electrotechnical Commission
IMS Industrial Modular System Enclosures
IP Ingress Protection
ISO International Organization for Standardization
JIC Joint Industry Council
LPPL Enclosure Less Plate with SCE Three Point Door Hardware
NEMA National electric Manufacturers Association
NEMA 1 Electrical enclosure for indoor use. Provides protection where unusual service conditions do not exist.
NEMA 12 Electrical enclosures for indoor use. Provides protection from dust, falling dirt and dripping non-corrosive liquids.
NEMA 3R Electrical Enclosure for outdoor use. Protection from falling rain, sleet and ice formation on the enclosure.
NEMA 4 Electrical enclosure for outdoor use. Protection from wind blown dust, rain, splashing water, hose directed water and ice formation on the enclosure.
NEMA 4X Electrical enclosure for outdoor use. Provides protection from corrosion, wind blown dust, rain, spraying water, hose directed water and ice formation on the enclosure.
PB Push Button
RFI Radio Frequency Interference
RMA Return Material Authorization
SCE-**LP Less Plate
SCE-*ALP 6.00 inch Deep Enclosure - Less Plate
SCE-*B Console Body
SCE-*BLP 8.00 inch Deep Enclosure - Less Plate
SCE-*C* Consolet
SCE-*CCOL Straight Column
SCE-*CHNF Continuous Hinge Enclosures Clamp Fastened
SCE-*CLP 10.00 inch Deep Enclosure - Less Plate
SCE-*DC Desk Console
SCE-*DLP 12.00 inch Deep Enclosure - Less Plate
SCE-*EL* Enviroline® Enclosure
SCE-*EL*WFLP Wall Mount Two Door with Center Mullion
SCE-*ELJ Enviroline® Junction Enclosure
SCE-*ELJW Enviroline® Junction Enclosure with Viewing Window
SCE-*ELP 14.00 inch Deep Enclosure - Less Plate
SCE-*FG Fiberglass Enclosures
SCE-*FLP 16.00 inch Deep Enclosure - Less Plate
SCE-*FS Free Standing Enclosure
SCE-*FSD Two Door Free Standing Enclosure
SCE-*FSDA Dual Access Free Standing Enclosure
SCE-*FSDAD Dual Access Two Door Free Standing Enclosure
SCE-*M* Multi Door Enclosure
SCE-*M3* Three Door Multi-Door Free Standing
SCE-*M4* Four Door Multi-Door Free Standing
SCE-*M5* Five Door Multi-Door Free Standing
SCE-*N* Type 1 enclosure
SCE-*P*AL Sub Panel, Aluminum
SCE-*P*GALV Sub Panel, Galvanized
SCE-*PBCOL Angled Column
SCE-*R* Type 3R Enclosure
SCE-*SBASE Pedestal Base
SCE-*SC Screw Cover Enclosures
SCE-*ST Sloping Top Enclosures
SCE-*VR* Vented 3R Enclosure
SCE-*WFLP Wall Mount Two Door with Overlapping Door
SCE-*WS Work Station
SCE-*XEL* Enclosure for Flange-Mounted Disconnects Enviroline® Series Enclosure
SCE-*XM* Heavy Duty Free Standing Disconnect Enclosure
SCE-MOD* Modular Enclosure
SS 304 Stainless Steel
SS6 316 Stainless Steel
TUV TUV Rhineland
UL Underwriters Laboratories, Inc
ULus Underwriters Laboratories, Inc (Tested to US Requirements)