For Stock Product Contact:

Saginaw Control and Engineering
Aurora Distribution Center
40 Aurora Industrial Parkway
Aurora, OH 44202-8086
Phone: 330/995-9800
Fax: 330/995-9802

Corporate Office/Manufacturing:

Saginaw Control and Engineering
95 Midland Road
Saginaw, MI 48638-5770
Phone: 989/799-6871
Fax: 989/799-4524

 sce-72el3018fs Printable Version

Application -

Designed to house a variety of electrical and electronic controls and instruments. Provisions for optional surface mounting or rack mounting of almost any type of equipment. Provides protection from dust, dirt, water and oil. For outdoor application a drip shield and drain holes are required. The enclosures are extra deep for applications requiring more interior space.

Construction -

  • 0.104 carbon steel.
  • Concealed hinge
  • Single-Door Single Access.
  • Removable and inchangeable doors.
  • Flange trough collar around all sides of door opening.
  • Seams continuously welded and ground smooth.
  • Lifting eyes for easy handling.
  • Black zinc die cast keylocking/padlocking handle.
  • 3-point latching mechanism.
  • Latch rods have ramp shoes for easier door closing.
  • Removable print pocket provided on door.
  • Mounting channels welded horizontally on sides of interior body at top, bottom and middle for mounting optional panels or rack mounting angles.
  • Oil resistant gasket.
  • Ground stud on door and body
  • Provisions for light kits.
  • Holes plugs provided to seal holes in bottom of enclosure.

  • Finish -

    ANSI-61 gray powder coat inside and out. Optional sub-panels are powder coated white.

    Industry Standards - (IS4)

    NEMA Type 3R, 4, 12 and Type 13
    UL Listed Type 3R, 4 and 12
    CSA Type 3R, 4 and 12
    IEC 60529 IP 66

    Notes -

    Part numbers that contain the letter "EL" that are over 30 inches wide have additional latches on the center of the door top and bottom.

    Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.

    Product Specifications -

    Part Number: SCE-72EL3018FS

    Description: EL FS Enclosure

    Height: 72.00"

    Width: 30.00"

    Depth: 18.00"

    Price Code: A2

    List Price: $1,251.20

    Catalog Page: 108

    Est. Ship Weight: 294.00 lbs


    Download CAD Package

    Add to Bill of Material

    Optional Accessories -

    SCE-13ELJEXPP - Pocket, Exterior Print

    SCE-14RMW - Wireway, Removable

    SCE-19ELJEXPP - Pocket, Exterior Print

    SCE-7230SOF19 - Frame, Swing Out Rack Mounting

    SCE-72FSHDPS - Panel Support Heavy Duty

    SCE-72P30F1 - Subpanel, Full

    SCE-72P30F2 - Subpanel, Half

    SCE-72RA24TH - Angle, Rack

    SCE-72RP30F5 - Angle, Rack

    SCE-72RP30F6 - Angle, Rack

    SCE-72SMP14 - Subpanel, Side Mount

    SCE-72SP30F3 - Panel, Swingout Full

    SCE-72SP30F4 - Panel, Swingout Half

    SCE-BV4XKIT - Kit, Breather Vent

    SCE-DS30N4 - Shield, Drip

    SCE-DV4XKIT - Kit, Drain Vent

    SCE-FS1212 - Shelf, Folding

    SCE-FS1818 - Shelf, Folding

    SCE-FS2424 - Shelf, Folding

    SCE-LF18 - Fixture, LED Light

    SCE-LF18NO - Fixture, LED Light w/o Outlet

    Similar Part Numbers -

    SCE-60EL2418FS - EL FS Enclosure

    SCE-603624FS - FS Enclosure

    SCE-72EL2418FS - EL FS Enclosure

    SCE-72EL2424FS - EL FS Enclosure

    SCE-72EL3024FS - EL FS Enclosure

    SCE-723618FS - FS Enclosure

    SCE-723624FS - FS Enclosure

    SCE-723630FS - FS Enclosure

    SCE-723636FS - FS Enclosure

    SCE-72EL3624FS - EL FS Enclosure

    Installation Information -

    Drip Shield Kit Assembly

    Folding Shelf Hole Pattern

    LED Light Fixture

    Removable Wire Cover

    Heavy Duty Panel Supports - In Single Door FS Enclosure

    Rack Mounting Angles

    Swing-Out Full Panel

    Swing-Out Rack Mounting Frame

    Swing-Out Half Panel


    People who have purchased this part also bought:

    Shield, Drip
    [Add to Bill of Material]

    Kit, Drain Vent
    [Add to Bill of Material]

    Kit, Breather Vent
    [Add to Bill of Material]