For Stock Product Contact:

Saginaw Control and Engineering
Aurora Distribution Center
40 Aurora Industrial Parkway
Aurora, OH 44202-8086
Phone: 330/995-9800
Fax: 330/995-9802
aurora@saginawcontrol.com


Corporate Office/Manufacturing:

Saginaw Control and Engineering
95 Midland Road
Saginaw, MI 48638-5770
Phone: 989/799-6871
Fax: 989/799-4524
sce@saginawcontrol.com




 sce-36x2d5412 Printable Version

Application -

Designed to easily accommodate various types of mounting methods with minimal modifications. Provisions are provided in the back of the enclosure for wall or frame mounting and in the bottom for wall mount brackets, frame mount, or partial provisions for a floor stand kit. Enclosure is designed to house most standard type disconnects.


Construction -

  • 0.104 carbon steel.
  • Seams continuously welded and ground smooth.
  • Flange trough collar around all sides of door opening.
  • Body stiffeners in large enclosures for extra rigidity.
  • Heavy duty lifting eyes anchor into reinforced top.
  • Removable center post to permit panel installation.
  • Concealed hinges.
  • Black zinc die cast coinproof/padlocking handle on main door with black zinc die cast padlocking handle on slave door.
  • 3-point latching mechanism.
  • Ends of latch rods have ramp shoes for easier door closing.
  • Panel supports.
  • Large removable print pockets.
  • Oil-resistant gasket.
  • Defeater on master door requires a screwdriver to open.
  • Ground stud on door and body.
  • Collar studs for mounting optional panel.
  • Provisions for light kit.

  • Finish -

    ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.


    Industry Standards - (IS4)

    NEMA Type 3R, 4, 12 and Type 13
    UL Listed Type 3R, 4 and 12
    CSA Type 3R, 4 and 12
    IEC 60529 IP 66


    Notes -

    Disconnect switch (or circuit breaker) and operating mechanism are not furnished with enclosure.


    Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.


    Product Specifications -

    Part Number: SCE-36X2D5412

    Description: 2DR Disc. Enclosure

    Height: 36.00"

    Width: 53.75"

    Depth: 12.00"

    Price Code: A2

    List Price: $1,463.80

    Catalog Page: 128

    Est. Ship Weight: 187.00 lbs

    SCE-36X2D5412

    Download CAD Package

    Add to Bill of Material


    Optional Accessories -

    SCE-13ELJEXPP - Pocket, Exterior Print

    SCE-19ELJEXPP - Pocket, Exterior Print

    SCE-36P52 - Subpanel, Bent

    SCE-BV4XKIT - Kit, Breather Vent

    SCE-DV4XKIT - Kit, Drain Vent

    SCE-FS1212 - Shelf, Folding

    SCE-FS1818 - Shelf, Folding

    SCE-FS2424 - Shelf, Folding

    SCE-HDWMK - Heavy Duty Mounting Kit

    SCE-LF18 - Fixture, LED Light

    SCE-LF18NO - Fixture, LED Light w/o Outlet


    Similar Part Numbers -

    SCE-42X2D5412 - 2DR Disc. Enclosure


    Installation Information -

    SCE-HDWMK, Heavy Duty Wall Mount Installation

    ABB Flange Mounted, Disconnects and Circuit Breakers

    Allen-Bradley Flange Mounted, Disconnects and Circuit Breakers

    Bussmann Flange Mounted, Disconnects and Circuit Breakers

    Cutler-Hammer Flange Mounted, Disconnects and Circuit Breakers

    GE Flange Mounted, Disconnects and Circuit Breakers

    Gould Flange Mounted, Disconnects and Circuit Breakers

    Moller Flange Mounted, Disconnects and Circuit Breakers

    Siemens Flange Mounted, Disconnects and Circuit Breakers

    Square D Flange Mounted, Disconnects and Circuit Breakers

    Drain/Vents