Designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are very wet conditions. Provides protection from dust, dirt, oil and water. For outdoor application a drip shield is recommended.
0.075” stainless steel Type 316/316L.
Continuously welded seams ground smooth.
Flange trough collar around all sides of door opening.
Oil-resistant door gasket.
Collar studs provided for mounting optional subpanels.
Hasp and staple for padlocking.
Stainless steel continuous hinge.
Removable print pocket furnished if height and width of enclosure is greater than 12 Inches.
Ground stud on door.
Stainless steel clamps on three sides door when greater than 30 inch wide.
Welded mounting provision top and bottom of back.
#4 brushed finish on all exterior surfaces. Optional sub-panels are powder coated white.
NEMA Type 4, 4X, 12 and Type 13
UL Listed Type 4, 4X and 12
CSA Type 4, 4X and 12
IEC 60529 IP 66
Provision for Lifting Lugs on enclosures when Height >48" and Depth >16". The Lifting Lug assembly will be included with the enclosure bolt pack.
Part Number: SCE-36H3016SS6LP
Description: Nema 4X LP Enclosure
Price Code: S7
List Price: $2,394.40
Catalog Page: 226
Est. Ship Weight: 105.00 lbs
Download CAD Package
Add to Bill of Material
SCE-36P30 - Subpanel, Bent
SCE-BV4XKIT - Kit, Breather Vent
SCE-DS30SS - Shield, S.S. Drip
SCE-DV4XKIT - Kit, Drain Vent
SCE-NADFK-3 - Kit, Swing-Out Panel Mounting
SCE-24H2006SS6LP - Nema 4X LP Enclosure
SCE-24H2008SS6LP - Nema 4X LP Enclosure
SCE-24H2010SS6LP - Nema 4X LP Enclosure
SCE-24H2408SS6LP - Nema 4X LP Enclosure
SCE-24H2412SS6LP - Nema 4X LP Enclosure
SCE-24H3008SS6LP - Nema 4X LP Enclosure
SCE-30H2008SS6LP - Nema 4X LP Enclosure
SCE-30H2408SS6LP - Nema 4X LP Enclosure
SCE-30H2412SS6LP - Nema 4X LP Enclosure
SCE-30H2416SS6LP - Nema 4X LP Enclosure
Drip Shield Kit Assembly
Swing Panel Assembly for LP Enclosures