Designed to house the main power supply in external enclosure on the right side of main enclosure, keeping the live side of the power supply separate from the primary electrical equipment. Provides protection from dirt, dust, oil and water and can house most standard type disconnects.
0.125” carbon steel.
Seams coninously welded and ground smooth.
Flange trough collar around all sides of door opening
Body stiffeners in large enclosures for extra rigidity.
Heavy duty lifting eyes anchor into reinforced top.
Removable center post to permit easy sub-panel installation.
Black zinc die cast padlocking handles.
3-point latching mechanism.
Large removable print pockets.
Oil-resistant door gasket.
Removable panels are mounted on collar studs.
Defeater on master door requires a screwdriver to open.
Mechanical interlock activated by the External Disconnect prevents main door of the enclosure from being closed unless the EXD enclosure is first closed.
Mechanical interlock activated by master door prevents slave doors from being opened first. Doors can be closed in any order.
Ground stud on door & body
Provisions for light kit.
Provision for 200 amp disconnect or less (Ref. D1 Cutout) - for use with Allen Bradley, Square D and Eaton (FHS) models only
ANSI-61 gray powder coating inside and out. Sub-panels are powder coated white.
NEMA Type 3R, 12 and Type 13
UL Listed Type 3R and 12
CSA Type 3R and 12
IEC 60529 IP 55
Disconnect switch (or circuit breaker) and operating mechanism are not furnished with enclosure.
SCE-125738 Defeater kit is required for use with Mechanical Defeater when using Siemens Flange mount Disconnect.
Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.
Part Number: SCE-90XD7818
Description: 2DR XD Enclosure
Price Code: A2
List Price: $5,214.27
Catalog Page: 1000
Est. Ship Weight: 0.00 lbs
Download CAD Package
Add to Bill of Material
SCE-82P76 - Subpanel, Bent
SCE-13ELJEXPP - Pocket, Exterior Print
SCE-14RMW - Wireway, Removable
SCE-19ELJEXPP - Pocket, Exterior Print
SCE-BP7818 - Plate, Barrier
SCE-BV4XKIT - Kit, Breather Vent
SCE-DV4XKIT - Kit, Drain Vent
SCE-FS1212 - Shelf, Folding
SCE-FS1818 - Shelf, Folding
SCE-FS2424 - Shelf, Folding
SCE-LF18 - Fixture, LED Light
SCE-LF18NO - Fixture, LED Light w/o Outlet
SCE-LF24 - Fixture, LED Light
SCE-LF24NO - Fixture, LED Light w/o Outlet
SCE-84XD7818 - 2DR XD Enclosure
Removable Wire Cover
Folding Shelf Hole Pattern
LED Light Fixture
ABB Flange Mounted, Disconnects and Circuit Breakers
Allen-Bradley Flange Mounted, Disconnects and Circuit Breakers
Bussmann Flange Mounted, Disconnects and Circuit Breakers
Cutler-Hammer Flange Mounted, Disconnects and Circuit Breakers
GE Flange Mounted, Disconnects and Circuit Breakers
Gould Flange Mounted, Disconnects and Circuit Breakers
Moller Flange Mounted, Disconnects and Circuit Breakers
Siemens Flange Mounted, Disconnects and Circuit Breakers
Square D Flange Mounted, Disconnects and Circuit Breakers
Bolt In Barrier (Encl. 40" High and Taller)
External Disconnect Enclosure REV. 2