For Stock Product Contact:

Saginaw Control and Engineering
Aurora Distribution Center
40 Aurora Industrial Parkway
Aurora, OH 44202-8086
Phone: 330/995-9800
Fax: 330/995-9802
aurora@saginawcontrol.com


Corporate Office/Manufacturing:

Saginaw Control and Engineering
95 Midland Road
Saginaw, MI 48638-5770
Phone: 989/799-6871
Fax: 989/799-4524
sce@saginawcontrol.com




 SCE-48EL2412LP Printable Version

Application -

Designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water. For outdoor application a drip shield is recommended.


Construction -

  • 0.075 In. carbon steel.
  • Seams continuously welded and ground smooth.
  • Flange trough collar around all sides of door opening.
  • Oil-resistant gasket.
  • Collar studs provided for mounting optional panels.
  • Concealed hinges.
  • Removable and interchangeable doors.
  • Black quarter turn latches.
  • Latches are opened or closed with a screwdriver.
  • Mounting holes in back of enclosure.
  • Mounting hardware, sealing washer and hole plug included.
  • Removable print pocket furnished if height and width of enclosure is greater than 12 inches.
  • Ground studs on door and body.

  • Options -

    - Optional tamper-resistant inserts are available.
    - Optional mounting feet available.
    - Door hardware available.
    - Interchangeable latches and handles available in the accessory section.


    Finish -

    ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.


    Industry Standards - (IS4)

    NEMA Type 3R, 4, 12 and Type 13
    UL Listed Type 3R, 4 and 12
    CSA Type 3R, 4 and 12
    IEC 60529 IP 66


    Notes -

    Provision for Lifting Lugs will be included on enclosures with Height >48" and with Depth >16". The Lifting Lug assembly will be included with the enclosure bolt pack.

    Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.


    Product Specifications -

    Part Number: SCE-48EL2412LP

    Description: EL Enclosure

    Height: 48.00"

    Width: 24.00"

    Depth: 12.00"

    Price Code: E3

    List Price: $477.30

    Catalog Page: 71

    Est. Ship Weight: 99.00 lbs

    No Image Available

    Download CAD Package

    Add to Bill of Material


    Optional Accessories -

    SCE-48P24 - Subpanel, Bent

    SCE-BVK - Breather Vent

    SCE-DS24N4 - Shield, Drip

    SCE-ELMFK4 - Foot Kit, EL Mounting (4pc.)

    SCE-ELSP3 - KIT, Swing-Out Panel (20 High & Up)


    Similar Part Numbers -

    SCE-36EL2412LP - EL Enclosure

    SCE-36EL2408LP - EL Enclosure

    SCE-36EL2416LP - EL Enclosure

    SCE-36EL2410LP - EL Enclosure

    SCE-36EL3008LP - EL Enclosure

    SCE-36EL3016LP - EL Enclosure

    SCE-36EL3010LP - EL Enclosure

    SCE-36EL3020LP - EL Enclosure

    SCE-36EL3012LP - EL Enclosure

    SCE-36EL3612LP - EL Enclosure


    Installation Information -

    Mounting Foot Kit for Enviroline® Enclosures

    Sealing Washer Specifications

    EL Flush Mount Frame

    Drip Shield Kit Assembly

    Drain/Vents

    Dead Front Wall Mount Installation Instructions

    Swing Panel Assembly for Enviroline® Enclosures

    Swing Panel ELSP for Encl. Height > 16

    Dead Front Wall Mount < 20 In Height Installation Instructions

    Swing Panel ELSP for Encl. Height <= 16

    Service Parts Wall Mount Enclosures



    People who have purchased this part also bought:


    SCE-BVK
    SCE-BVK
    Breather Vent
    [Add to Bill of Material]


    No Image Available
    SCE-DS24N4
    Shield, Drip
    [Add to Bill of Material]


    No Image Available
    SCE-48P24
    Subpanel, Bent
    [Add to Bill of Material]