Designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions. Designed to house most standard type disconnects. Provides protection from dust, dirt, oil, and water. For outdoor application a drip shield is recommended.
0.075” stainless steel Type 304.
Seams continuously welded and ground smooth.
Flange trough collar around all sides of door opening.
Collar studs provided for mounting optional panels.
Holes provided in body for mounting disconnect operating handle and operating mechanism.
Stainless steel concealed hinge.
Doors are interchangeable and easily removed by pulling hinge pin.
3-point latching mechanism.
Latches are opened or closed with screwdriver (optional tamper-resistant inserts available).
Mounting holes in back of enclosure.
Mounting hardware, sealing washer and hole plug included.
Ground studs on door and body.
Black zinc die cast coinproof/padlocking handle.
#4 brushed finish on all exterior surfaces. Optional sub-panels are powder coated white.
NEMA Type 3R, 4, 4X, 12 and Type 13
UL Listed Type 3R, 4, 4X and 12
CSA Type 4, 4X and 12
IEC 60529 IP 66
Disconnect switch (or circuit breaker) and operating mechanism are not furnished with this enclosure.
SCE-125738 Defeater kit is required for use with Mechanical Defeater when using Siemens and ABB Flange mount Disconnect.
Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.
Provision for Lifting Lugs on enclosures when Height >48" and Depth >16". The Lifting Lug assembly will be included with the enclosure bolt pack.
Part Number: SCE-42XEL3110SSLP
Description: S.S. XEL Enclosure
Price Code: S5
List Price: $1,941.03
Catalog Page: 230
Est. Ship Weight: 108.00 lbs
Download CAD Package
Add to Bill of Material
SCE-42P30 - Subpanel, Bent
SCE-BV4XKIT - Kit, Breather Vent
SCE-DF42EL30LP - Panel, Dead Front (Wall Mount)
SCE-DS30SS - Shield, S.S. Drip
SCE-DV4XKIT - Kit, Drain Vent
SCE-ELMFK4SS - Foot Kit, S.S. EL Mounting (4pc.)
SCE-ELSP3 - KIT, Swing-Out Panel (20 High & Up)
SCE-30XEL2508SSLP - S.S. XEL Enclosure
SCE-30XEL2510SSLP - S.S. XEL Enclosure
SCE-36XEL2508SSLP - S.S. XEL Enclosure
SCE-36XEL3110SSLP - S.S. XEL Enclosure
SCE-36XEL3112SSLP - S.S. XEL Enclosure
SCE-42XEL3112SSLP - S.S. XEL Enclosure
SCE-42XEL3712SSLP - S.S. XEL Enclosure
SCE-42XEL3716SSLP - S.S. XEL Enclosure
SCE-48XEL3710SSLP - S.S. XEL Enclosure
SCE-48XEL3712SSLP - S.S. XEL Enclosure
Mechanical Defeater (Variable Depth)
Mechanical Defeater (Cable Operated)
Cutler-Hammer Flange Mounted, Disconnects and Circuit Breakers
Allen-Bradley Flange Mounted, Disconnects and Circuit Breakers
Bussmann Flange Mounted, Disconnects and Circuit Breakers
ABB Flange Mounted, Disconnects and Circuit Breakers
GE Flange Mounted, Disconnects and Circuit Breakers
Gould Flange Mounted, Disconnects and Circuit Breakers
Moller Flange Mounted, Disconnects and Circuit Breakers
Siemens Flange Mounted, Disconnects and Circuit Breakers
Square D Flange Mounted, Disconnects and Circuit Breakers
Mounting Foot Kit for Enviroline® Enclosures
Drip Shield Kit Assembly
Swing Panel Assembly for Enviroline® Enclosures
Swing Panel ELSP for Encl. Height > 16
Sealing Washer Specifications
Dead Front Wall Mount With 3 Point Latching Hardware