For Stock Product Contact:

Saginaw Control and Engineering
Aurora Distribution Center
40 Aurora Industrial Parkway
Aurora, OH 44202-8086
Phone: 330/995-9800
Fax: 330/995-9802

Corporate Office/Manufacturing:

Saginaw Control and Engineering
95 Midland Road
Saginaw, MI 48638-5770
Phone: 989/799-6871
Fax: 989/799-4524

 SCE-36XEL3110LP Printable Version

Application -

Designed to house electrical and electronic controls, instruments and components. Provides protection from dust, oil and water. Designed to house most standard type disconnects. For outdoor application a drip shield is recommended.

Construction -

  • 0.075 carbon steel.
  • Seams continuously welded and ground smooth.
  • Flange trough collar around all sides of door opening.
  • Oil-resistant gasket.
  • Collar studs provided for mounting optional panels.
  • Disconnect cutout provided on flange.
  • Concealed hinge.
  • Doors are interchangeable and easily removed by pulling hinge pins.
  • 3-point latching mechanism.
  • Latches are opened or closed with a screwdriver (optional tamper-resistant inserts are available).
  • Mounting holes on back of enclosure.
  • Mounting hardware, sealing washer and hole plug included.
  • Ground studs on door and body.
  • Black zinc die cast coinproof/padlocking handle.

  • Finish -

    ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.

    Industry Standards - (IS4)

    NEMA Type 3R, 4, 12 and Type 13
    UL Listed Type 3R, 4 and 12
    CSA Type 3R, 4 and 12
    IEC 60529 IP 66

    Notes -

    Disconnect switch (or circuit breaker) and operating mechanism are not furnished with this enclosure.

    SCE-125738 Defeater kit is required for use with Mechanical Defeater when using Siemens and ABB Flange mount Disconnect.

    Special Instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.

    Product Specifications -

    Part Number: SCE-36XEL3110LP

    Description: XEL LP Enclosure

    Height: 36.00"

    Width: 31.38"

    Depth: 10.00"

    Price Code: E3

    List Price: $586.79

    Catalog Page: 82

    Est. Ship Weight: 96.00 lbs


    Download CAD Package

    Add to Bill of Material

    Optional Accessories -

    SCE-36P30 - Subpanel, Bent

    SCE-BV4XKIT - Kit, Breather Vent

    SCE-DF36EL30LP - Panel, Dead Front (Wall Mount)

    SCE-DS30N4 - Shield, Drip

    SCE-DV4XKIT - Kit, Drain Vent

    SCE-ELMFK4 - Foot Kit, EL Mounting (4pc.)

    SCE-ELSP3 - KIT, Swing-Out Panel (20 High & Up)

    Similar Part Numbers -

    SCE-24XEL2108LP - XEL LP Enclosure

    SCE-24XEL2508LP - XEL LP Enclosure

    SCE-24XEL2510LP - XEL LP Enclosure

    SCE-30XEL2108LP - XEL LP Enclosure

    SCE-30XEL2508LP - XEL LP Enclosure

    SCE-30XEL2510LP - XEL LP Enclosure

    SCE-36XEL2508LP - XEL LP Enclosure

    SCE-36XEL2510LP - XEL LP Enclosure

    SCE-36XEL3108LP - XEL LP Enclosure

    SCE-36XEL3112LP - XEL LP Enclosure

    Installation Information -

    Mechanical Defeater (Variable Depth)

    Mechanical Defeater (Cable Operated)

    Square D Flange Mounted, Disconnects and Circuit Breakers

    Gould Flange Mounted, Disconnects and Circuit Breakers

    Bussmann Flange Mounted, Disconnects and Circuit Breakers

    Allen-Bradley Flange Mounted, Disconnects and Circuit Breakers

    Siemens Flange Mounted, Disconnects and Circuit Breakers

    GE Flange Mounted, Disconnects and Circuit Breakers

    ABB Flange Mounted, Disconnects and Circuit Breakers

    Moller Flange Mounted, Disconnects and Circuit Breakers

    Cutler-Hammer Flange Mounted, Disconnects and Circuit Breakers

    Mounting Foot Kit for Enviroline® Enclosures

    Drip Shield Kit Assembly


    Swing Panel Assembly for Enviroline® Enclosures

    Swing Panel ELSP for Encl. Height > 16

    Sealing Washer Specifications

    Dead Front Wall Mount With 3 Point Latching Hardware

    People who have purchased this part also bought:

    Subpanel, Bent
    [Add to Bill of Material]

    Shield, Drip
    [Add to Bill of Material]

    Kit, Drain Vent
    [Add to Bill of Material]

    Kit, Breather Vent
    [Add to Bill of Material]