Saginaw Control and Engineering's Products are Made in the USA

Saginaw Control and Engineering - Your Enclosure Source

Industry Standards



For Stock Product Contact:

Saginaw Control and Engineering
Reno Distribution Center
795 Denmark Drive
McCarran, NV 89434-4401
Phone: 775/343-1834
Fax: 775/343-1838
reno@saginawcontrol.com


Corporate Office/Manufacturing:

Saginaw Control and Engineering
95 Midland Road
Saginaw, MI 48638-5770
Phone: 989/799-6871
Fax: 989/799-4524
sce@saginawcontrol.com



On each part number you will find the Industry Standards indicating the specific Industry Standards that apply to the specific part.


IS1 - Industry Standards

NEMA Type 12 and Type 13
UL Listed Type 12
CSA Type 12
IEC 60529 IP 55


IS2 - Industry Standards

NEMA Type 4, 12 and Type 13
UL Listed Type 4 and 12
CSA Type 4 and 12
IEC 60529 IP 66


IS3 - Industry Standards

NEMA Type 3R, 12 and Type 13
UL Listed Type 3R and 12
CSA Type 3R and 12
IEC 60529 IP 55


IS4 - Industry Standards

NEMA Type 3R, 4, 12 and Type 13
UL Listed Type 3R, 4 and 12
CSA Type 3R, 4 and 12
IEC 60529 IP 66


IS5 - Industry Standards

NEMA Type 4, 4X, 12 and Type 13
UL Listed Type 4, 4X and 12
CSA Type 4, 4X and 12
IEC 60529 IP 66


IS7 - Industry Standards

NEMA Type 3R
UL Listed Type 3R
CSA Type 3R
IEC 60529 IP 32


IS8 - Industry Standards

NEMA Type 1
UL Listed Type 1
CSA Type 1
IEC 60529 IP 30


IS9 - Industry Standards

UL Component Recognized
CSA Component Recognized


IS10 - Industry Standards

UL Component Recognized


IS11 - Industry Standards

UL Component Recognized Type 3R


IS16 - Industry Standards

NEMA Type 3RX
UL Listed Type 3RX
CSA Type 3RX
IEC 60529 IP 32


Special instructions apply for IS3, IS4 and IS6 to maintain the environmental rating of Type 3R for these parts. Instructions are located on the enclosure door. Drip shield is required on IS3, drip shield is recommended on IS4 and IS6. Drain holes are required on all.