Internal Disconnect Enclosure

Increase personal protection against Arc Flash and Shock Hazards, with the Internal Disconnect Enclosure. This enclosure can be used within an environmentally rated enclosure to isolate the main power supply, increasing personal protection by preventing incidental contact or exposure to the high voltage arc flash and shock hazard, and potentially reducing the PPE level for the lower risk components when the Internal Disconnect Enclosure cover is closed.

The Internal Disconnect Enclosure can be easily incorporated into a new system or added to a pre-existing system with variable depth or cable operated disconnects. The Internal Disconnect Enclosure aids in achieving compliance with NFPA 70E by concealing main power supply.

Product Attributes:

  • Field installable in new for existing systems with variable depth or cable operated disconnects with knockouts provided.
  • Symmetrical design for use with left or right hand disconnects.
  • Removable continuous hinges.
  • 110 degree door stop prevents incidental contact with other components.
  • Black spring loaded quarter turn latch with 7mm square insert and key that latches automatically when door is closed.
  • Gland plate provided top and bottom for easy installation of wires.  
  • Mounting holes provided in back for securing to the sub-panel.
  • Ground stud on door and body.     
  • Orange Texture finish
  • Nema Type 1
  • UL cUL Listed Type 1
  • CSA Approved Type 1
    		•

    SCE-100AFSD - 30 to 100 amp disconnect - 22”H X 12”W X 6.50”D
    SCE-200AFSD - 200+ amp disconnect - 32”H X 12”W X 7.75”D


    95 Midland Road - Saginaw, MI 48638
    (989)799-6871
    Fax: (989)799-4524
    http://www.saginawcontrol.com/